辽东铀成矿带连山关地区韧性剪切带与铀成矿作用     

吴迪  刘永江  李伟民  常瑞虹 《岩石学报》2020,36(8):2571-2588

连山关地区位于华北克拉通北缘铀成矿省辽东铀成矿带，已知铀矿床（点）均发育在韧性剪切带附近。为了解韧性剪切带运动学、几何学构造变形机制及与铀矿的关系，本文以连山关岩体周缘韧性剪切带为研究对象，通过野外宏观调查和室内微观研究相结合的研究方法，探讨构造变形期次、韧性剪切带形成机理及其对铀成矿的控制作用。研究表明：连山关岩体周缘发育的韧性剪切带与近南北向挤压构造变形有关，其右行韧性剪切带应变类型为压扁应变，属于一般压缩-平面应变范围，Flinn指数K值在0.19~0.69之间，岩石类型属于S/SL型构造岩。研究区内铀矿体均为隐伏盲矿体，主要赋存于沿着连山关岩体和辽河群接触带右行剪切作用形成的背斜褶皱核部，和北东东向断裂关系密切。综合分析认为，连山关岩体南缘北西向韧性剪切带为一级控矿构造，是区内铀矿热液运移的通道，而剪切带边部的晚期北东东向断裂则是铀矿储存空间；铀源可能来自于太古宙古风化壳，并在大型韧性剪切活动（提供热液运移通道）和基性脉岩侵入（提供热源和还原剂）等综合因素作用下运移、富集成矿。  相似文献   

南海北部陆坡西部海域“海马”冷泉甲烷渗漏及其海底表征     

赵静  梁前勇  尉建功  陶军  杨胜雄  梁金强  陆敬安  王建军  方允鑫  龚跃华  何雪宝 《地球化学》2020,(1):108-118

2015年3月"海马"号遥控无人潜水器(ROV)在南海北部陆坡西部海域首次发现活动冷泉,并命名为"海马"冷泉,此后中国地质调查局广州海洋地质调查局先后组织了3个航次,对"海马"冷泉开展进一步勘查和研究。本次研究在综合分析4个航次调查数据的基础上,初步阐述"海马"冷泉的分布范围、地形地貌、生物群落、自生碳酸盐岩和流体活动等特征。总体而言,"海马"冷泉区地势平缓,气体渗漏现象非常发育,是以CH4为主要气体渗漏形成的活动冷泉区,且气体渗漏活动具有时空迁移性。气体碳同位素组成表明,海马冷泉区的CH4为混合成因气,且以微生物成因为主;"海马"冷泉区发育有多种类型的化能自养冷泉生物群落,冷泉区种类丰富,目前已报道了多个冷泉生物新种。这些发现为研究南海北部陆坡西部海域天然气水合物分解及其环境效应、冷泉生物生命起源与演化和南海与印度洋及太平洋物种迁移贯通等科学问题提供重要依据。  相似文献   

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains     

Zhengan Su  Donghong Xiong  Jianhui Zhang  Tao Zhou  Hongkun Yang  Yifan Dong  Haidong Fang  Liangtao Shi 《地球表面变化过程与地形》2019,44(1):88-97

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.  相似文献   

桂林-阳朔地区DEM地形特征与岩性相关性分析及分类研究     

陈霄燕  潘军  邢立新  蒋立军  孙也涵  仲伟敬  范博文 《地球信息科学学报》2019,21(12):1867-1876

地形地貌是岩性解译的重要信息,地形因子作为描述DEM数字曲面几何特征的定量指标参数,可用来定量化表达不同岩性所在地区地形地貌特征。本文以桂林-阳朔地区为研究区,研究地形因子数学、地质意义,建立岩性与地形因子组合间的定量关联,进而实现岩石类型划分。本文基于ASTERGDEM提取坡度、起伏度等12个地形因子,在分析各个地形因子地质意义基础上,通过聚类分析及方差分析的多元统计分析方法,研究各岩性地形因子特性及其关联性,建立研究区岩性之间的定量差异;此外,利用因子分析方法研究岩性分类过程中的主导因素,确定适宜岩性分类方法以实现定量化岩性分类。实验结果表明：不同岩性、不同地形地貌的地形因子（组合）之间具有显著差异,基于因子分析得到的宏观地形复杂度指数（MTI）以及微观曲率指数（MCI）对岩石类型的分类精度达77.36%。研究表明,地形复杂度等地形因子可用于岩性分类,采用因子分析方法可获取反映地形地貌宏观、微观特征的定量指标,且岩性分类效果良好。  相似文献   

冻融循环下花岗岩剪切蠕变试验与模型研究     

张峰瑞  姜谙男  杨秀荣  申发义 《岩土力学》2020,41(2):509-519

为探讨冻融对寒区工程岩石剪切蠕变特性的影响，以吉林省辉白隧道花岗岩为研究对象，对经历不同冻融循环次数的试样开展细观特征分析和剪切蠕变试验。试验结果表明：（1）随着冻融次数的增加，试样裂隙、孔隙不断扩展，岩石表面损伤现象愈发明显；（2）试样主要以中小孔隙为主，孔隙度随着冻融次数的增加呈非线性增长趋势；（3）随着冻融循环次数增加，蠕变变形量和蠕变速率逐渐增大，而蠕变时长、破坏应力和长期强度均呈现明显降低趋势。根据试验结果，进行冻融岩石非定常蠕变参数的表达，提出了冻融岩石损伤黏性元件，构建了花岗岩冻融剪切蠕变本构模型。将蠕变试验曲线和理论模型拟合曲线进行对比，验证了模型的正确性和适用性。通过对蠕变参数进行敏感性分析，研究了其对花岗岩蠕变变形的影响，并给出了蠕变参数随冻融循环次数的变化规律。该研究结果对于寒区岩体工程长期稳定性评价具有指导意义。  相似文献   

塑性极限分析鱼雷锚锚尖贯入阻力     

瑜璐  杨庆  杨钢  张金利 《岩土力学》2020,41(6):1953-1962

鱼雷锚安装过程中,锚尖形状影响尖部贯入阻力进而影响贯入深度。基于塑性极限分析理论下限法分析不同锚尖长径比x的椭圆形锚尖的贯入阻力和贯入阻力系数,并考虑了贯入深度、锚-土界面摩擦对贯入阻力以及贯入阻力系数的影响。结果表明:(1)锚-土界面光滑时,锚尖贯入阻力系数随着锚尖长径比的增大而减小;锚-土界面粗糙时,锚尖贯入阻力系数随着锚尖长径比的增大而增大。(2)摩擦力对贯入阻力系数的影响随着ξ增大而增大。(3)随着埋置深度增加,贯入阻力系数受x影响最小时所对应的摩擦系数逐渐减小。(4)当锚-土界面摩擦系数ω 0.75时,工程中可选用ξ1的锚尖用以减小端部贯入阻力;当ω0.26时,ξ1的锚尖提供更小的端部贯入阻力。锚尖长径比ξ=0和ξ=1的下限解与前人研究的桩基和圆形结构的理论解较为一致,进一步验证了所提出的椭圆形锚尖下限法模型的可行性。  相似文献   

硅灰加固宁波软土的试验研究     

王泽平  王常明  江南  张在恒 《岩土工程技术》2020,(2):111-116,121

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

珠江三角洲海相沉积软土压缩和剪切变形特性试验研究   总被引：3，自引：0，他引：3       下载免费PDF全文

张岩  耿济世  毛磊  刘芙荣 《地震工程学报》2018,40(4):745-751

为了研究近代海相沉积软土的变形特征,本文对珠江三角洲河口地区的全新世海相沉积的软土进行了室内单轴压缩与不同围压下作用下的三轴固结不排水(CU)、不固结不排水(UU)的剪切试验。试验结果表明:原状土和重塑土样的孔隙比随压力的增大而下降,且与加压方式有密切关系,加压幅度越小,土的扰动破坏越小;原状土样固结系数随着压力增加而递减,整体近似符合指数函数分布,重塑土样固结系数随着压力增加逐渐增大,整体近似符合线性函数分布。在相同的固结压力下,原状土样的强度低于重塑土样的强度。土样的应力应变曲线为应变硬化型,且围压对重塑土的影响小于原状土。  相似文献